ZyXEL P-870HW-51a v2
VDSL2 wireless router with 4x100M ethernet ports.
Supported Versions
Hardware Highlights
Installation
Installation procedure to be added here.
Hardware
Internals: http://zyxel.tradesp.eu/images/open_870.png Dead link --- tmomas 2018/04/06 09:10
Info
| Architecture | MIPS |
|---|---|
| Vendor | Broadcom |
| bootloader | CFE |
| System-On-Chip | BCM6368 |
| Board ID | 96368VVW |
| CPU/Speed | BCM4350 V3.1 / 400MHz |
| Flash size | 4 MiB |
| Flash-Chip | cFeon EN29LV320BB-70 |
| RAM | 32 MiB |
| RAM-Chip | Winbond W9412G6IH-5? x2 |
| Wireless | BCM4318 b/g (onboard) |
| Ethernet | 4x 100M |
| Internet | VDSL/VDSL2 |
| USB | No |
| Serial | Yes |
| JTAG | Seems no |
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
| Pin | Signal |
|---|---|
| 1 | VCC  DO NOT CONNECT! |
| 2 | TxD |
| 3 | RxD |
| 4 | N/A |
| 5 | GND |
Configure terminal with: baud rate 115200 and 8N1 (8 bits, No parity bit, 1 stop bit)