Cette carte est basé sur le BananaPi est aussi connu/vendu sous le nom de BananaPi R1.

Page du BPi-R1

Pour plus de carte basé sur Allwinner, veuillez vous rendre ici : soc.allwinner.sunxi

Cette carte est disponible depuis de nombreux revendeur, incluant le fabricant lui-même (voir : ici pour le BananaPi.

Vous pouvez utiliser votre cavalier habituel, le brochage est :

                           GND TX RX
             J12   o  o  o  o  o  o
{SD slot}          o  o  o  o

• La grande majorité des fonctionnalité fonctionne désormais.
• Des détail de pinctrl pour l'USB et le régulateur de puissance AHCI
• Le noyau n'est toujours pas complétement supporté pour la vidéo (en cours de correction) et l'audio (snd-card-simple?)
• rtl8192cu mac80211 driver AP/hostapd support seems to be broken (association fails) in compat-wireless 2014-11-04, fixes were merged upstream, OpenWrt backport at http://patchwork.ozlabs.org/patch/435596/
• Please refer to soc.allwinner.sunxi regarding the Allwinner A20 SOC.

Veuillez vous référer à : soc.allwinner.sunxi.

U-Boot SPL 2015.01 (Jan 19 2015 - 01:03:44)
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2


U-Boot 2015.01 (Jan 19 2015 - 01:03:44) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
I2C:   ready
DRAM:  1016 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

Reserved 8192kB of RAM for Framebuffer.
In:    serial
Out:   serial
Err:   serial
SCSI:  SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst 
Net:   dwmac.1c50000
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  2  1  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0...
Found U-Boot script /boot.scr
reading /boot.scr
377 bytes read in 16 ms (22.5 KiB/s)
## Executing script at 43100000
reading uImage
1939536 bytes read in 230 ms (8 MiB/s)
reading dtb
23803 bytes read in 29 ms (800.8 KiB/s)
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   ARM OpenWrt Linux-3.18.2
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1939472 Bytes = 1.8 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Kernel Image ... OK
   Using Device Tree in place at 43000000, end 43008cfa

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.18.2 (daniel@dev) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43888) ) #1 SMP PREEMPT Tue Jan 20 00:38:52 CET 2015
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Lamobo R1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] PERCPU: Embedded 9 pages/cpu @eefe1000 s6848 r8192 d21824 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258576
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1025276K/1040384K available (3883K kernel code, 170K rwdata, 1092K rodata, 208K init, 613K bss, 15108K reserved, 262144K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04e3ef4   (4976 kB)
[    0.000000]       .init : 0xc04e4000 - 0xc0518000   ( 208 kB)
[    0.000000]       .data : 0xc0518000 - 0xc0542bc0   ( 171 kB)
[    0.000000]        .bss : 0xc0542bc0 - 0xc05dc278   ( 614 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000010] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.000022] Switching to timer-based delay loop, resolution 41ns
[    0.000353] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[    0.000511] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[    0.000671] Console: colour dummy device 80x30
[    0.000702] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000718] pid_max: default: 32768 minimum: 301
[    0.000819] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000832] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001457] CPU: Testing write buffer coherency: ok
[    0.001768] /cpus/cpu@0 missing clock-frequency property
[    0.001787] /cpus/cpu@1 missing clock-frequency property
[    0.001801] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001857] Setting up static identity map for 0x40011b38 - 0x40011b6c
[    0.060418] CPU1: Booted secondary processor
[    0.060465] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.060537] Brought up 2 CPUs
[    0.060556] SMP: Total of 2 processors activated.
[    0.060563] CPU: All CPU(s) started in HYP mode.
[    0.060568] CPU: Virtualization extensions available.
[    0.064989] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.065401] pinctrl core: initialized pinctrl subsystem
[    0.065798] regulator-dummy: no parameters
[    0.072030] NET: Registered protocol family 16
[    0.072377] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.111505] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[    0.111538] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[    0.111568] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.111583] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[    0.111606] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.111619] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[    0.111844] vcc3v0: 3000 mV 
[    0.112070] vcc3v3: 3300 mV 
[    0.112311] vcc5v0: 5000 mV 
[    0.112412] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    0.112432] platform gmac-3v3: Driver reg-fixed-voltage requests probe deferral
[    0.112859] SCSI subsystem initialized
[    0.113235] usbcore: registered new interface driver usbfs
[    0.113326] usbcore: registered new interface driver hub
[    0.113448] usbcore: registered new device driver usb
[    0.113589] pps_core: LinuxPPS API ver. 1 registered
[    0.113597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.113628] PTP clock support registered
[    0.114681] Switched to clocksource arch_sys_counter
[    0.121774] NET: Registered protocol family 2
[    0.122770] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.122855] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.122976] TCP: Hash tables configured (established 8192 bind 8192)
[    0.123058] TCP: reno registered
[    0.123073] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.123130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.123419] NET: Registered protocol family 1
[    0.124891] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.125041] audit: initializing netlink subsys (disabled)
[    0.125120] audit: type=2000 audit(0.110:1): initialized
[    0.133902] VFS: Disk quotas dquot_6.5.2
[    0.134175] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.135956] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.135980] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.136713] msgmni has been set to 1490
[    0.138829] bounce: pool size: 64 pages
[    0.138854] io scheduler noop registered
[    0.138867] io scheduler deadline registered
[    0.138916] io scheduler cfq registered (default)
[    0.139232] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[    0.141941] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.185145] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.187494] console [ttyS0] disabled
[    0.207936] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.827666] console [ttyS0] enabled
[    0.853116] dw-apb-uart 1c28c00.serial: Couldn't set LCR to 0
[    0.859865] dw-apb-uart 1c28c00.serial: Couldn't set LCR to 0
[    0.865665] dw-apb-uart 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 36, base_baud = 1500000) is a U6_16550A
[    0.897606] dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0
[    0.904353] dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0
[    0.910133] dw-apb-uart 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 52, base_baud = 1500000) is a U6_16550A
[    0.923685] platform 1c50000.ethernet: Driver stmmaceth requests probe deferral
[    0.931169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.937721] ehci-platform: EHCI generic platform driver
[    0.943103] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    0.950423] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    0.957767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.963975] ohci-platform: OHCI generic platform driver
[    0.969341] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[    0.976650] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[    0.984029] usbcore: registered new interface driver usb-storage
[    0.990323] mousedev: PS/2 mouse device common for all mice
[    0.996051] 1c22800.lradc supply vref not found, using dummy regulator
[    1.002972] input: 1c22800.lradc as /devices/soc@01c00000/1c22800.lradc/input/input0
[    1.015611] axp20x-regulator axp20x-regulator: regulators node not found
[    1.022447] LDO1: 1300 mV 
[    1.025662] LDO2: at 3000 mV 
[    1.029049] LDO3: at 2275 mV 
[    1.032193] LDO4: at 2800 mV 
[    1.035652] LDO5: at 2800 mV 
[    1.039020] DCDC2: at 1400 mV 
[    1.042453] DCDC3: at 1250 mV 
[    1.045666] axp20x 0-0034: AXP20X driver loaded
[    1.051497] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.060110] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[    1.066108] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.104966] sunxi-mmc 1c0f000.mmc: base:0xf00fa000 irq:64
[    1.110383] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    1.119366] sunxi-ss 1c15000.crypto-engine: Die ID 0
[    1.126599] TCP: cubic registered
[    1.129923] Initializing XFRM netlink socket
[    1.134241] NET: Registered protocol family 17
[    1.139970] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.154720] 8021q: 802.1Q VLAN Support v1.8
[    1.159092] Registering SWP/SWPB emulation handler
[    1.164461] registered taskstats version 1
[    1.169350] ahci-5v: 5000 mV 
[    1.172719] usb1-vbus: 5000 mV 
[    1.176306] usb2-vbus: 5000 mV 
[    1.179765] gmac-3v3: 3300 mV 
[    1.192478] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.203123] mmc0: new high speed SDHC card at address 0007
[    1.209124] mmcblk0: mmc0:0007 SD4GB 3.67 GiB 
[    1.215156]  mmcblk0: p1 p2
[    1.284770] stmmaceth 1c50000.ethernet: no reset control found
[    1.290606]  Ring mode enabled
[    1.293657]  No HW DMA feature register supported
[    1.298206]  Normal descriptors
[    1.301525]  TX Checksum insertion supported
[    1.312534] libphy: stmmac: probed
[    1.315976] eth0: PHY ID 03625f24 at 0 IRQ POLL (stmmac-0:00) active
[    1.322324] eth0: PHY ID 03625f24 at 1 IRQ POLL (stmmac-0:01)
[    1.328075] eth0: PHY ID 03625f24 at 2 IRQ POLL (stmmac-0:02)
[    1.333815] eth0: PHY ID 03625f24 at 3 IRQ POLL (stmmac-0:03)
[    1.339562] eth0: PHY ID 03625f24 at 4 IRQ POLL (stmmac-0:04)
[    1.345311] eth0: PHY ID 03625f24 at 30 IRQ POLL (stmmac-0:1e)
[    1.351487] ehci-platform 1c14000.usb: EHCI Host Controller
[    1.357183] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    1.365061] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[    1.384693] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[    1.390994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.397795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.405032] usb usb1: Product: EHCI Host Controller
[    1.409905] usb usb1: Manufacturer: Linux 3.18.2 ehci_hcd
[    1.415307] usb usb1: SerialNumber: 1c14000.usb
[    1.420415] hub 1-0:1.0: USB hub found
[    1.424200] hub 1-0:1.0: 1 port detected
[    1.428963] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.434563] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    1.442461] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[    1.464712] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.470975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.477780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485007] usb usb2: Product: EHCI Host Controller
[    1.489881] usb usb2: Manufacturer: Linux 3.18.2 ehci_hcd
[    1.495283] usb usb2: SerialNumber: 1c1c000.usb
[    1.500364] hub 2-0:1.0: USB hub found
[    1.504154] hub 2-0:1.0: 1 port detected
[    1.508701] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[    1.515373] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[    1.523235] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[    1.588865] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.595671] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.602885] usb usb3: Product: Generic Platform OHCI controller
[    1.608815] usb usb3: Manufacturer: Linux 3.18.2 ohci_hcd
[    1.614209] usb usb3: SerialNumber: 1c14400.usb
[    1.619278] hub 3-0:1.0: USB hub found
[    1.623078] hub 3-0:1.0: 1 port detected
[    1.627642] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    1.634281] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    1.642166] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[    1.708865] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.715669] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.722884] usb usb4: Product: Generic Platform OHCI controller
[    1.728816] usb usb4: Manufacturer: Linux 3.18.2 ohci_hcd
[    1.734210] usb usb4: SerialNumber: 1c1c400.usb
[    1.739304] hub 4-0:1.0: USB hub found
[    1.743089] hub 4-0:1.0: 1 port detected
[    1.752073] ahci-5v: disabling
[    1.755248] vcc5v0: disabling
[    1.758219] vcc3v0: disabling
[    1.763696] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.772739] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.786829] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    1.794370] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.801424] Freeing unused kernel memory: 208K (c04e4000 - c0518000)
[    1.824825] usb 2-1: new high-speed USB device number 2 using ehci-platform
procd: Console is alive
procd: - watchdog -
[    1.976519] usb 2-1: New USB device found, idVendor=0bda, idProduct=8178
[    1.983358] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.990556] usb 2-1: Product: 802.11n WLAN Adapter
[    1.995478] usb 2-1: Manufacturer: Realtek
[    1.995484] usb 2-1: SerialNumber: 00e04c000001
[    2.144726] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    2.152218] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[    2.158121] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    2.167092] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc 
[    2.176100] scsi host0: ahci_platform
[    2.180162] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    2.534697] ata1: SATA link down (SStatus 0 SControl 300)
procd: - preinit -
Detected lamobo-r1 // Lamobo R1
[    3.059245] b53_common: found switch: BCM53125, rev 4
[    3.075030]  RX IPC Checksum Offload disabled
[    3.079392]  No MAC Management Counters available
[    4.215844] random: mktemp urandom read with 5 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    5.054745] stmmaceth 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
mounting /dev/root
[    8.024898] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[   10.366792] NET: Registered protocol family 10
[   10.377511] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.399214] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2
[   10.407251] Backport generated by backports.git backports-20141023-2-g4ff890b
[   10.423167] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.433137] nf_conntrack version 0.5.0 (16023 buckets, 64092 max)
[   10.536320] xt_time: kernel timezone is -0000
[   10.550345] cfg80211: Calling CRDA to update world regulatory domain
[   10.557053] cfg80211: World regulatory domain updated:
[   10.562214] cfg80211:  DFS Master region: unset
[   10.567719] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.577621] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.585751] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.593792] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.601951] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.610093] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.619712] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.627934] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.636057] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.672897] PPP generic driver version 2.4.2
[   10.678468] NET: Registered protocol family 24
[   10.694029] rtl8192cu: Chip version 0x11
[   10.785446] rtl8192cu: MAC address: ac:a2:13:53:ee:cc
[   10.790575] rtl8192cu: Board Type 0
[   10.794546] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   10.800535] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   10.811591] usbcore: registered new interface driver rtl8192cu
[   15.909409] b53_common: found switch: BCM53125, rev 4
[   15.932858]  RX IPC Checksum Offload disabled
[   15.942242]  No MAC Management Counters available
[   15.951227] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.969201] device eth0.1 entered promiscuous mode
[   15.974007] device eth0 entered promiscuous mode
[   15.985366] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   16.019232] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
procd: - init complete -
[   17.904811] stmmaceth 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   17.913055] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.927353] br-lan: port 1(eth0.1) entered forwarding state
[   17.933027] br-lan: port 1(eth0.1) entered forwarding state
[   17.946732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   17.984450] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   19.924690] br-lan: port 1(eth0.1) entered forwarding state



BusyBox v1.22.1 (2015-01-19 01:01:41 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Bleeding Edge, r44040)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root@OpenWrt:/#