Mercury MW4530R

Cheap clone of TP-Link TL-WDR4310 for China market.

Manufacturer's site: http://mercurycom.com.cn/Product/detail?pd=89 and its Google Translation.

Price: AliExpress - about 61 USD

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Please check out the article flash.layout. It contains an example and a couple of explanations.

→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

The default network configuration is:

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

→ failsafe_and_factory_reset

→ hardware.button on howto use and configure the hardware button(s).

The Linksys WRT54GL has two buttons. They are Reset and Secure Easy Setup. Here, we merely name the buttons, so we can use them in the above Howto:

Model Number

Front:

Photo of front of the casing

Back:

Photo of back of the casing

→ Warranty

• To remove the cover do a/b/c

Photo of PCB

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Photo of PCB with markings

→ port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:

Photo of PCB with markings

→ generic.debrick

How to add tags